HobbyKing
NYLON SCREWS 6X75MM (10PCS)
,
Nylon Screws (10pcs) Great for detachable wings or hatch doors. ...5 Reviews
HobbyKing
ULTRA-THIN PRISMATIC PRE-CUT STICKER 155X23MM (4 PAIRS)
| Dimensions | 155x23mm |
5 Reviews
HobbyKing
TURNIGY 1800A SERVO 8G/1.5KG/.10SEC (3-PACK)
| Model | TGY-1800A |
| Speed | 0.10sec |
| Torque | 1.5kg/cm |
| Size | 22x11.7x24.3mm |
Voltage:6v, Weight:8g,
Save money and shipping weight with the TURNIGY 1800A 3 ...5 Reviews
HobbyKing
LUMIFLY THIN STRIP LED SYSTEM
:, LED System Driver 1pc,
The Lumifly Thin-strip LED system can be attached to any ...5 Reviews
HobbyKing
TURNIGY G110 BRUSHLESS OUTRUNNER 295KV (1.10 GLOW)
| RPM | 295kv |
| Max current | 55A |
| No load current | 10V/1.2A |
| Current capacity | 65A/15sec |
| Internal resistance | 0.03 ohm |
| Diameter of shaft | 8mm |
| Dimensions | 79x63mm |
Battery:, 8~9S Cell /29.6~33.3V, Weight:, 485g (not including connectors),
Designed to be a direct swap out for your 1.10 ...5 Reviews
HobbyKing
PILOT MODEL # 1 (35X32.5X40)
,
Pilot Model. Smaller size, for .40 planes or smaller.5 Reviews
HobbyKing
WHEEL PANTS! FIBREGLASS WHEEL COVERS (90 SIZE)
| Length | 15cm |
| Maximum Wheel diameter | 60mm |
5 Reviews
HobbyKing
KD 36-12L BRUSHLESS OUTRUNNER 1000KV
| Battery | 3S or 4S Lipoly |
| Peak Amps | [37A/3 Cell] or [28A/2Cell] |
| Suggested Prop | 10x6~10x7 or 11x6~11x7 |
| Suggested ESC | 40A+ |
| Shaft | 5mm |
| Motor Dimensions | 37.4 x 42mm |
| Weight | 152g |
| Shaft Size | 5.0mm~20mm |
| Motor Dimensions | 37.4mm~42mm |
| Weight | 152g |
Kv: 1000rpm/V,
An excellent outrunner. Running at 1000kv its an excellent replacement ...5 Reviews
HobbyKing
AIR ACTUATOR 40MM
| Total Length Closed | 80mm |
| Total Length Open | 120mm |
3 Reviews
HobbyKing
OSPREY BRUSHLESS V-HULL R/C BOAT (1075MM) PLUG-N-DRIVE
| Length | 1075mm |
| Width | 310mm |
| Height | 120mm |
| Weight | 2780g |
| Drive system | 4mm |
Motor:, 4074 size 2200kv Watercooled brusless, ESC:, 180A watercooled (required),
The Osprey is an extra large (1.075mtr) V-Hull fiberglass racing ...5 Reviews
HobbyKing
TURNIGY 160MAH 1S 30C (EFLITE, MINIUM COMPATIBLE)
: 160mAh, : 1S / 1 Cell / 3.7v, : 30C Constant, : 4.3g (including balance & discharge plug), : 37x12x6mm, : JST-XH,
Upgraded capacity and discharge curve. More power for your E-Flite ...5 Reviews
HobbyKing
HOBBY KING 3.7G / .4KG / .10SEC MICRO SERVO
| Size | 19x8x26mm |
| Voltage | 3~6v |
| Torque | 11.1oz / .5kg @ 6v |
| Speed | .12 s/60deg @ 6v |
| Weight | 3.7g |
5 Reviews
HobbyKing
TURNIGY P2627L EDF OUTRUNNER 4200KV FOR 55/64MM
| Specs | Kv- |
| Dimensions | 49 x 26mm |
| Shaft | 3.0mm |
| Voltage | 11.1V |
| Weight | 53g |
| No-load RPM | 45459 |
| Load current | 22.7A |
| Load RPM | 37040 |
| Thrust | 560g |
| Mounting Hole Bolt Circle | 18mm |
| Mtg. Hole Number & Size | 4 x M2 |
| *Note | The motor does not include gold connectors, photo will be updated very soon. |
No-load current:2A,
The first of its kind and the start of many ...5 Reviews
HobbyKing
ADJUSTABLE ALLOY PUSH ROD/BRACE 2.6X90MM
,
Adjustable alloy push rod brace. Very light (around 2-3g) Very ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 1600MAH 3S 25~50C LIPO PACK
| Discharge Plug | XT60 |
: 1600mAh, : 3S1P / 3 Cell / 11.1V, : 25C Constant / 50C Burst, : 143g (including wire, plug & case), : 120x34x18mm, : JST-XH,
ore than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews